3526-14C5B cob light source 50W power 5000LM luminous flux light source
| Product Name | 3526 |
| Product Origin | China Dongguan |
| Product power | 50W |
| Forward Voltage | 42-45V |
| Chip Size | 15*31 |
| Beam Angle | 120 |
| Product Model | 3426-14C5B |
| product Brand | lianwei |
| Product Luminous flux | 5000LM |
| Rated Current | 1.1A |
| Substrate Material | Aluminum substrate |
| Luminous Efficiency | 100lm/w |
4 advantages of choosing botaielectronics
Preferred aluminum substrate
Layer by layer aluminum material, high thermal conductivity, high quality
1. Source factory
No middlemen to earn the price difference
2. Support customization
According to your needs, we can customize the products you need
3. Imported machinery
15 sets of encapsulation equipment, daily output of 5k
4. Wholesale stock
We can support one piece of hair, the price is affordable from the large quantity
1. Please choose correct power supply for led strips. The total power of the led strip is about 80% of the power supply, and it cannot be fully loaded to ensure that the power supply works at the correct and stable voltage.
2. We suggest 5 meters/roll for the led strip.If it is over 5 meters length, the brightness of LED will vary greatly.If the customer can accept the case, length can be made over 5 meters/roll.
3. Adhesive tape on the back side of the strip,with its superior adhesive and weather resistance, and can be connected to any transparent glass, metal and plastic surface. But on some certain surfaces, such as cloth, wood, will affect its function and durability.Please test the adhesion of the led strip before installation.
4. Please pay special attention to the minimum bending diameter of the led strip is 60mm, so as to avoid direct or indirect damage to FPC and components on FPC, which may lead to damages of the strip .
5. In order to ensure waterproof and anti-corrosive function , after the power line is screwed into the connector, it is recommended to inject the connector with a single component of silica gel (or neutral glass glue, or waterproof grease) and cover the exposed copper wire of the power line for protection.
6. The non-waterproof led strip shall not be completely exposed for outdoor use. Do not touch or install the strip when it is charged.
7. It is recommended to use switch power supply that has passed relevant safety regulations (with short circuit protection, over voltage protection and over current protection)
A: Yes , we welcome sample to check quality or place small trail order .
A: It need about 1-2 weeks for smaples, within 25 days for sea order .
A:Yes, customers' logo can be made ,but this may request MOQ for customized products.
A:Yes , our technician can design and develop products according to your requirements.
We offer 1 year warranty to our products. Please provide high-definition product's photos or video to show problem. Then we will send new lights or replacement parts together with next order
A:Paypal. Western Union, TT(Telegraphic Transfer), LC are acceptable.